We're Open
+44 7340 9595 39
+44 20 3239 6980

[Solved](c)Be able to initiate and carry out linear static finite element (FE) analyses, critically evaluate the results of these

  100% Pass and No Plagiarism Guaranteed

[Solved](c)Be able to initiate and carry out linear static finite element (FE) analyses, critically evaluate the results of these analyses and communicate these findings to both specialist and non-specialist audiences

NHA 2430 Design Analysis

Finite element design exercise

(subject to external moderation)

 

INTRODUCTION

This assignment is designed to allow you to demonstrate your understanding of the practical aspects of finite element analysis (FEA) and your ability to communicate this knowledge.

It is important that you understand that your mark will be heavily weighted towards how well you have reported your analysis. Hence, you will gain little from spending hours on the computer if you don’t write up your work well.

LEARNING OUTCOMES

The following learning outcomes (as detailed in the module specification) will be partially assessed by this assignment:

 

(c)           Be able to initiate and carry out linear static finite element (FE) analyses, critically evaluate the results of these analyses and communicate these findings to both specialist and non-specialist audiences.

(d)           Be able to critically appraise the robustness of designs with uncertain parameters with the aid of FE analyses.

(e)           Be able to make judgements guided by manual calculations to support the application of commercial software for linear elastic finite element analysis and fatigue analysis.

BRIEF

You are required to carry out a finite element analysis of the load cell shown in the diagram below. The object of the analysis, within the context of the course work exercise, is only to determine the relationship between the load applied and the level of strain measured by the strain gauge.

The robustness analysis, within the context of the assessment, is only to be conducted with the consideration of material elasticity, the thickness of the load cell, and the location of the strain gauge (A, refer to Figure 1).

 

YOU SHOULD NOT ATTEMPT TO FIND THE STRESS AROUND THE THREADED HOLE - THE STRESS RAISERS IN THIS REGION CAN BE IGNORED.

The load cell has a simple construction with a uniform thickness throughout. The load is applied via rods screwed in the threaded holes at either end (the load can be either tensile or compressive). The material properties are given below while the individual dimensions should be taken from the Table in the associated file.

                Young’s modulus = 210 GN/m2

                            Poisson’s ratio = 0.28


100% Plagiarism Free & Custom Written,
Tailored to your instructions


International House, 12 Constance Street, London, United Kingdom,
E16 2DQ

UK Registered Company # 11483120


100% Pass Guarantee

STILL NOT CONVINCED?

View our samples written by our professional writers to let you comprehend how your work is going to look like. We have categorised this into 3 categories with a few different subject domains

View Our Samples

We offer a £ 2999

If your assignment is plagiarised, we will give you £ 2999 in compensation

Recent Updates

Details

  • Title: [Solved](c)Be able to initiate and carry out linear static finite element (FE) analyses, critically evaluate the results of these analyses and communicate these findings to both specialist and non-specialist audiences
  • Price: £ 129
  • Post Date: 2021-10-20T11:43:19+00:00
  • Category: Essays
  • No Plagiarism Guarantee
  • 100% Custom Written

Customer Reviews

[Solved](c)Be able to initiate and carry out linear static finite element (FE) analyses, critically evaluate the results of these analyses and communicate these findings to both specialist and non-specialist audiences [Solved](c)Be able to initiate and carry out linear static finite element (FE) analyses, critically evaluate the results of these analyses and communicate these findings to both specialist and non-specialist audiences
Reviews: 5

A masterpiece of assignment by , written on 2020-03-12

My order went 3 hours late and I also went mad. Then the customer support team calmed me down and offered me a flat discount of 50%. However, I did get my order and chilled out as the work was exactly what I requested. Next time I would place my order a bit sooner to save any trouble.
Reviews: 5

A masterpiece of assignment by , written on 2020-03-12

Writing is not my field. I take help from this website for my accounting assignment. The work is good and I scored good grades in it. Thank you from the bottom of my heart.