We're Open
+44 7340 9595 39
+44 20 3239 6980

[Solved] Motor and Machine Automation

  100% Pass and No Plagiarism Guaranteed

[Solved] Motor and Machine Automation

Motor and Machine Automation

We have a trim board = 1*4 or 1*6

all boards are white.

we need to design a machine that can do things to the board.

first thing screw some screws. on the door frame, you may have a piece of trim and the door frame about 36" up if you have a door jamb.

we could put brackets on the trim.

the board we got to stack one against another and they`re being shoved into this machine so we need to build a machine over here between the boards to stop and start the board and puts in a bracket. it might have bracket here to screw here screw there. ( same as the figure) between we need a motion control stuff. part of that we going need a coupler nip rollers (coupler, motor,..). will squeezing the board and one of them probably has a motor and one is an ipoare and we`ve got some friction right here so we can drive the boards. then registration sensor, and we need to sensor that can detect the board. then we will have basically a plate we going to amount have two screwdrivers into this plate. we need motion go up and down. and each one has to exist motor, Dc motor ( to perform better torque control in it). ( 1/2 hp brushed motor)

two screws ( 2" and .5") during travel 2.22" and 0.75"

-constant force

- fix time 1.2 to driver screw

- when sensor red should move 36" and stop.

- accy +1.5mm

-cycle time 5 second.

- diameter the roller > 2.5"

- contact whole board.

- pushed with 3lb force from the beginning.

- need to take care of rolling and the tension of rolling.

- length of board 72"-90"

-force 1lb from the middle to the end.

- between the rolling can be bushed, 2 board.

- screw collaboration should be 1.2second to drive screw.

-power supply 110, 230... no limitation.

- the screwdrivers = 20lb.

100% Plagiarism Free & Custom Written,
Tailored to your instructions

International House, 12 Constance Street, London, United Kingdom,
E16 2DQ

UK Registered Company # 11483120

100% Pass Guarantee


View our samples written by our professional writers to let you comprehend how your work is going to look like. We have categorised this into 3 categories with a few different subject domains

View Our Samples

We offer a £ 2999

If your assignment is plagiarised, we will give you £ 2999 in compensation

Recent Updates


  • Title: [Solved] Motor and Machine Automation
  • Price: £ 189
  • Post Date: 2021-10-18T05:00:46+00:00
  • Category: Essays & Coursework
  • No Plagiarism Guarantee
  • 100% Custom Written

Customer Reviews

[Solved] Motor and Machine Automation [Solved] Motor and Machine Automation
Reviews: 5

A masterpiece of assignment by , written on 2020-03-12

My order went 3 hours late and I also went mad. Then the customer support team calmed me down and offered me a flat discount of 50%. However, I did get my order and chilled out as the work was exactly what I requested. Next time I would place my order a bit sooner to save any trouble.
Reviews: 5

A masterpiece of assignment by , written on 2020-03-12

This is my second order which I booked recently at Insta Research. I just got my coursework completed expertly. Just waiting for good scores now.