We write, we don’t plagiarise! Every answer is different no matter how many orders we get for the same assignment. Your answer will be 100% plagiarism-free, custom written, unique and different from every other student.
I agree to receive phone calls from you at night in case of emergency
Please share your assignment brief and supporting material (if any) via email here at: firstname.lastname@example.org after completing this order process.
No Plagiarism Guarantee - 100% Custom Written
The aim of this assignment is to discuss the design and
implementation of a mobile robot with the functionality of a
MAZE-SOLVER (not a simple wall-follower).
Learning Outcomes to be Assessed:
1. specify the requirements for a real-time application
2. implement control software using real-time methods
The UK Micromouse wall follower is a competition for small mobile robots (mice) that have the task of finding their way to the centre of a maze ( https://www.bcu.ac.uk/techfest for rules). A maze may be constructed such that there is a route to the centre that can be found by following the left-hand wall. Mazes can also be constructed that do not have a simple route to the centre and therefore require the mouse to search the maze, typically using a flooding algorithm, thereby finding the centre.
2. The assignment (60% of module mark)
(The report does not require the use of a micromouse, MPLAB, C18 compiler or other tools associated with implementation of code). You are required to present a report on the implementation of a micromouse maze-solver, submitted via Moodle (please note: this is for a maze solver, not a simple wall-follower).
1. An introduction to micromouse maze-solver is required. Use available text-books and internet sources to provide material.
2. Algorithms and diagrams should be used to demonstrate the operation of a forwardrotational PD position controller to give positional control of the robot.
3. An open-loop speed profiler should be described to give acceleration and speed control of the robot.
4. A discussion of sensor configurations for 3,4,5 and 6-sensor designs is required, along with a description of how the sensor readings would be used in the control algorithm to maintain a central position in the maze (tracking), and how they would used to determine the presence or absence of walls.
5. At least one numerical method for maze solving should be described, again with the use of diagrams and algorithms, clearly demonstrating how the mouse would navigate to the centre of a 16x16 UK micromouse competition maze.
The report should have an introduction to the subject matter, clearly defined sections that relate to the requirements, and a brief summary. It should consist of no more than 25 pages of A4 including diagrams, with a maximum of 4000 words.
Best Coursework Writing Service in UK