We're Open
+44 7340 9595 39
+44 20 3239 6980

[Solved]a. Select the type of drilling rig you would prefer to use to drill Well “VB - 1”. Fully explain the reasons for your

  100% Pass and No Plagiarism Guaranteed

[Solved]a. Select the type of drilling rig you would prefer to use to drill Well “VB - 1”. Fully explain the reasons for your choice, taking metocean, environmental, drilling and economic considerations into account

Drilling and Well Engineering Assignment

This assignment accounts for 40% of the total marks available for the GL5035course. Each question carries equal marks.

  1. Given the following information on Well “VB - 1”:
  • Mud line (ML) –  1650m TVDSS
  • Type of well – Vertical
  • TD at 5,100m TVDSS
  • Location of well – UTM Zone 49N, WGS84 Datum
  • Prospect characterisation – Miocene and Oligocene Sandstones and Carbonates
  • Seabed temperature is +/- 30C
  • Distance to supply base 170 nautical miles
  • Anticipated spud date August 2018

 

  1. Select the type of drilling rig you would prefer to use to drill Well “VB - 1”.  Fully explain the reasons for your choice, taking metocean, environmental, drilling and economic considerations into account. (8 marks)
  2. With the help of suitable diagrams, briefly describe two options for installing the conductor casing. (6 marks)
  3. Bottom hole temperatures in the lower sections of the well are expected to exceed 1100 C. Reactive mudstones and shales are also prognosed in the lower sections intercalated with reservoir quality rock. What mud system would you choose to drill these sections? Explain the reasons for your choice.
  1. The graph below shows predicted pore and fracture pressures (inclusive of safety margins) for the commitment well 220/02a – 22 which is to be drilled by a jackup rig. The water depth at the location is 50m and the rig’s rotary table (RT) elevation is 35m AMSL. Average sea temperatures are 80C.   The reservoir section consists of alternating sandstone and shale sequences between 2,375m and 2,875m TVDSS. The reservoir is overlain by 50m of anhydrite. The planned TD is 3,000m TVDSS in 8.1/2” hole.  A 20” conductor/riser has been set at 230m TVDSS. The reservoir fluids are methane gas, H2S and 2% BS&W.  The H2S partial pressure is 0.08 psi.

The pressure containment casing strings available are:

 

                7”, 32 ppf, P110 with VamTop connections

                9.5/8”, 47 lb/ft, L80 with Vam Top connections

9.5/8”, 53.5 ppf, L80 with VamTop connections

9.5/8”, 47 ppf, P110 with VamTop connections

13.3/8”, 72 ppf, L80 with Vam Top connections

13.3/8”, 68 ppf, K55 with Vam Top connections

  1.                      i.            Draw a casing schematic showing where you would select the preliminary casing points. Clearly identify on the schematic the casing sizes and shoe depths and whether the casing would be run as a full string or as a liner.  (10 marks)         

                      Note: Due allowances will be made for errors of graphical interpolation.

  1.                    ii.            What is the maximum mud weight that could be used while drilling the reservoir sections of the well? Assume the annular pressure loss (APL) is 400 psi when drilling these sections. (5 marks)

 

  1.                   iii.            Calculate the maximum gas to wellhead pressure. Assume a gas gradient of 0.1 psi/ft from base reservoir. The wellhead is 10m below RT. Show your calculations. (5 marks)

Universal Transverse Mercator’s (UTM) Coordinate System

 
   

 


100% Plagiarism Free & Custom Written,
Tailored to your instructions


International House, 12 Constance Street, London, United Kingdom,
E16 2DQ

UK Registered Company # 11483120


100% Pass Guarantee

STILL NOT CONVINCED?

View our samples written by our professional writers to let you comprehend how your work is going to look like. We have categorised this into 3 categories with a few different subject domains

View Our Samples

We offer a £ 2999

If your assignment is plagiarised, we will give you £ 2999 in compensation

Recent Updates

Details

  • Title: [Solved]a. Select the type of drilling rig you would prefer to use to drill Well “VB - 1”. Fully explain the reasons for your choice, taking metocean, environmental, drilling and economic considerations into account
  • Price: £ 89
  • Post Date: 2021-10-12T12:38:29+00:00
  • Category: Assignment Requirements
  • No Plagiarism Guarantee
  • 100% Custom Written

Customer Reviews

[Solved]a. Select the type of drilling rig you would prefer to use to drill Well “VB - 1”.  Fully explain the reasons for your choice, taking metocean, environmental, drilling and economic considerations into account [Solved]a. Select the type of drilling rig you would prefer to use to drill Well “VB - 1”. Fully explain the reasons for your choice, taking metocean, environmental, drilling and economic considerations into account
Reviews: 5

A masterpiece of assignment by , written on 2020-03-12

I received my order last night and now I’m writing my reviews. My assignment has all the points I needed along with a good style. The citations used are relatable and professional. The best thing is the discount I got because I recommended my friend too to use their service. I am so pleased to use this effective service. The features are also amazing, everything is good. Will come again soon!
Reviews: 5

A masterpiece of assignment by , written on 2020-03-12

CIPD assignment is not my cup of tea. That’s the reason I sought out this place suggested by my friend. I would say that the writers of this site are really admiring. I was assigned the best CIPD writer that solved all my issues. He explained to me the difficult topics so well that now I am able to talk on those topics eloquently. I owe my writer a huge thanks and praise! And yes, I would recommend other students as well to come to instaresearch.co.uk for the top CIPD assignment help.